Red Runner Dampening Sleeves = Replacement for Rogers Sleeves & WaterSleeves

For the Form Roller.

Red Runners advanced new fiber technology sets it apart from other dampening sleeves. Red Runner provides the ultimate in slip-on, shrink fit design. Its unique fiber system delivers unprecedented control of ink/water balance. Red Runner Dampening Sleeves are long lasting, clean up easily and are lint-free. Unlike rigid tubes, Red Runner can't break, crack, split or shred. The problems of low spots, mourning bands and critical roller tolerances are eliminated And its consistent ultra-fine surface achieves a new level of pattern-free printing performance.

Unlike cumbersome rigid tubes, Red Runner Dampening Sleeves are conveniently packaged in small, easy to store containers Available in a full range of sizes, they are packaged six to a case.

• Precision Water Control
• Pattern Free
• Won't Break, Crack, Split or Shred
• No Low Spots
• Shrink Fit
• Long Lasting
• Lint Free, Rayon Composite Fabric
• No Mourning Bands
• Easy to Handle and Store
• Good replacmeent for paper sleeves (Thinner material than Red-1 stock)

Red Runner can be effectively used in the following dampening applications:

• As a replacement for rigid tube dampening sleeves using an over sized roller.
• Installed on oversized bareback dampening rollers.
• As a top (outer) cover going directly over an existing fabric cover thereby totally eliminating lint and pattern.

RED RUNNER's consistent and ultra-fine surface provides optimum water control and pattern-free performance.

Inconsistent surface with high/low spots can result in reduced water control when using rigid tubes.

How to Order
We can help you cross reference from a Watersleeve number, press make/model or you can use the information below and the chart that follows.

Click For Redrunner Chart

Click for Installation Instructions

Click for Red Runner Sleeves

Red Runner Size A – Fits 1.600" to 1.860" Roller Diameters
Red Runner Size B – Fits 1.860" to 2.130" Roller Diameters
Red Runner Size C – Fits 2.130" to 2.527" Roller Diameters
Red Runner Size D – Fits 2.527" to 2.615" Roller Diameters
Red Runner Size DD – Fits 2.615" to 2.990" Roller Diameters
Red Runner Size E – Fits 2.990" to 3.400" Roller Diameters
Red Runner Size F – Fits 3.400" to 3.990" Roller Diameters
Red Runner Size G – Fits 3.990" to 4.490" Roller Diameters

Rogers Paper Sleeve Numbers: First 3 digits indicate roller diameter +/- 0.004"
Last 2 digits indicate maximum length of roller.

Note:
Part number RFD = 1 Form roll cover and 1 Ductor roll cover
Part number of RD-xx equals Ductor cover or RF-xx equals Form roll cover

E-mail for price and availability on

*CUSTOM* VERATEC RED RUNNER DAMP SLEEVES 569165 DD32/2.615-2.990/32LONG (KEN-RRDD32)
*CUSTOM* VERATEC RED RUNNER DAMP SLEEVES 569167 DD42/2.615-2.990/42LONG (KEN-RRDD42)
*CUSTOM* VERATEC RED RUNNER DAMPENING SLEEVES E58/2.990-3.400/58569152 (KEN-RRE58)

• Models: KEN-RRBT11, KEN-RRBT13, KEN-RRBT19, KEN-RRBT21, KEN-RRBT26, KEN-RRCT18, KEN-RRDT37, KEN-RRDT42, KEN-RRA19, KEN-RRA24, KEN-RRB14, KEN-RRB20, KEN-RRB24, KEN-RRB28, KEN-RRB32, KEN-RRB42, KEN-RRC12, KEN-RRC19, KEN-RRC24, KEN-RRC28, KEN-RRC32, KEN-RRC38, KEN-RRC42, KEN-RRD32, KEN-RRD38, KEN-RRD42, KEN-RRD56, KEN-RRDD32, KEN-RRDD38, KEN-RRDD42, KEN-RRDD56, KEN-RRE28, KEN-RRE38, KEN-RRE42, KEN-RRE48, KEN-RRE58, KEN-RRE78, KEN-RRF40, KEN-RRF52, KEN-RRF62, KEN-RRF79, KEN-RRG52, KEN-RRG58, KEN-RRG66, KEN-RRG80 & KEN-RRH80