ULTRAPEN™ PT4 is Myron L® Company’s ground breaking, new Pocket Tester for measuring Free Chlorine Disinfecting Power, Free Chlorine Equivalent (FCE), as well as Temperature. It is waterproof and designed to be extremely accurate, fast, and simple to use in diverse water quality applications.
HIGH PERFORMANCE FEATURES
- Accuracy of up to ±0.3 ppm FCE
- Proprietary Sensor Design
- Calibration with pH and ORP Standard Solutions
- Automatic Temperature Compensation
- Durable, Fully Encapsulated Electronics
- Temperature Readout
- Powered by One N Type Battery (Included)
PT4 COMES WITH
- PT4 Pocket Tester Pen - Battery Installed
- User Replaceable pH/ORP Sensor - Installed
- Soaker Cap
- Pocket Clip
- ORP Electrode Cleaning Paper
- Operating Instructions
PT4 MEASUREMENT MODES
||Method of Measurement
||Once stabilized, the readings are captured then displayed.
||Real-time readings are displayed continuously during measurement.
|FCE Free Chlorine Range:
||0 – 10.0 ppm
|FCE Free Chlorine Accuracy:
||<5.00ppm ±0.3 ppm; ≥5.00ppm ±0.5 ppm
|FCE Free Chlorine Resolution:
||0 - 71°C / 32 - 160°F
||± 0.1°C / ± 0.1°F
||0.1°C / 0.1°F
||Active Mode 30-100mA Sleep Mode 2μA
||Automatic In Calibration Mode From 15°C to 30°C
||17,15cm L x 1,59cm D or 6.75in. L x .625in. D
||50.4g / 1.78oz. (without soaker cap and lanyard)
||Anodized Aircraft Aluminum with Protective Coating
||One N type, Alkaline, 1.5V
|Calibration Standard Solutions:
||PH4, PH7, PH10, ORP80, ORP260, ORP470
||0 - 55°C / 32 - 131°F
| Enclosure Ratings:
||IP67 and NEMA6
EN61236-1: 2006 – Annex A: 2008:
|Electrostatic discharge to the PT4 may cause it to spontaneously turn on. If this occurs, the PT4 will turn off.
Standard Solutions For Calibration:
The ULTRAPEN™ PT4 requires pH4, pH7, and pH10 pH Buffer Solutions and 80 mV Quinhydrone, 260 mV Quinhydrone, or 470 mV MLC Light’s ORP Standard Solutions for wet calibration, and Sensor Storage Solution for proper storage.
Click to order Standard Solutions and Buffers
ORP ELECTRODE CLEANING PAPER:
Routinely cleaning the platinum electrode will keep the sensor free of build-up that can affect the speed and accuracy of FCE free chlorine measurements. Instructions for use are included with the paper.
REPLACEMENT FCE SENSOR
The ULTRAPENT™ PT4 features a use-replaceable FCE sensor with a unique porous liquid-junction. Installation instructions included with sensor.
The PT4, excluding the FCE sensor, has a one (1) year limited warranty. The FCE sensor has a six (6) month limited warranty.
Includes battery installed, protective/hydration cap, scoop, pocket clip, holster, lanyard, ORP electrode cleaning paper, quick start guide
Click for Operation Manuals / Instructions
- Models: PT4, BATT11768, BATT11768-B3, RPT4 & PTSC