The EM-25 are new instruments, optical and video, prepared to the control and to the small objects precision measures or on different typology of surfaces in the working.
They are manufactured completely in aluminium and in steel and their conformation and use praticalness bring them easily useable on plane or curve surfaces.
In the EM-25 there are also a prepared quality microscope with longitudinal sliding, a digital micrometric movement gauge for measurements up to 25mm with resolution of 0.001mm, a high ring luminous source with led variable intensity and a strong aluminium base adjustable in height.
With these instruments it is possible to perform measurements and inspections on plane or curve surface and on subjects high up to 50mm (with optional spacers).
One very interesting characteristic of EM-25 is the possibility to can use them indifferently and with the maximum easiness as optical and/or video instruments in the same time. For the use in video, a micro camera USB from 3.2Mpixel is used that is inserted on the ocular appropriately designed for the use maximum simplicity.
The software VIDEO VIEW basic, in endowment with USB camera, offers many possibilities: X-Y distances measurements, rays, angles, polygons, images saving with measurements and comments, comparisons, overlapping of a drawing or image in transparency on real time video, etc. (for major information we suggest to consult the software page).
With the EM-25 OPTIC it is possible to make also linear or angular measurements with a measurement scale includable under the eyepiece (the linear scale is yet inserted on equipment); the minimum measurement depends from the used model lens (25X–50X–75X–100X).
The EM-25s are available only in optical version or optical-video; to the optical version it will be possible however to add the special micro camera USB with software also in a second time.
In function of the desired optical magnifies it is possible to choose between a set of 8 models, 4 for the EM-25 OPTIC and 4 for the EM-25 USB VIDEO OPTIC respectively with lens 25X–50X–75X–100X (100X–200X–300X–400X in video) and relative measurement scale. For the set OPTIC it is possible to change easily the endowment lens with other ones, but, in this case, they will not be able to be used to perform measurements because the ocular scale is usable only in combination with the endowment lens; if you want use them it is necessary to change the scale and the ocular. In the set OPTIC, objectives will be used equally with different enlargement factors and make high precision measurements with the millesimal digital gauge in endowment.
For the set USB VIDEO OPTIC, the use in video allows the use of all available lenses because the measurements are performed on the image from the software and except them from the digital gauge up to 25mm.
The two systems, EM-25 OPTIC e EM-25 USB VIDEO OPTIC, are prepared to be laid also on delicate surfaces or check objects with different heights. With this aim they are equipped with 4 Teflon feet with magnetic hold and 4 in steel ones for standard uses; to adequate them to the objects height, also 2 sets of 4 spacers (optional) are available that added to the respective feet adapt themselves easily to the desired height through a magnetic slot system. There are also, as accessories, anti sliding rolls for checks and measurements on cylinders of different types with diameter from 110mm.
The illumination, guaranteed from a rechargeable battery, with a range of about 32 continue working hours (a work month in normal condition), so that the EM-25 are completely autonomous from any external feeding source.
The EM-25 USB VIDEO OPTIC connection to a portable PC is very simple because it is necessary only a USB cable. For the equipment movements on the surfaces to check, the operator will take advantage of a practical handle for both the sets.
Important accessories are in progress that will bring more multiple and unique on the market these instruments and will implement the software VIDEO VIEW basic to satisfy at maximum the requests from the users of different sectors.
SPECIFICATIONS
|
Peak Optical Microscope
|
2008-25
|
2008-50
|
2008-75
|
2008-100
|
|
Magnification
|
Optical
|
25X
|
50X
|
75X
|
100X
|
|
Video *
|
100X
|
200X
|
300X
|
400X
|
|
|
Optical
|
3,0 mm
|
1,6 mm
|
1 mm
|
0,8 mm
|
|
Video *
|
2.8x2.1 mm
|
1.36x1.02 mm
|
0.92x0.69 mm
|
0.67x0.5 mm
|
|
Working distance
(objective-surface)
|
17.0 mm
|
11.7 mm
|
11.7 mm
|
11.6 mm
|
|
Eyepiece scale divisions
|
|
|
|
|
|
* referred to a 14" monitor
|
APPLICATION EXAMPLES
Control and measurement of flexographic plates
PRICES
EM-25 OPTIC includes:
- Optical microscope *
- Digital millesimal movement gauge
- Luminous source with led variable intensity
- Aluminium base adjustable in height
- Rechargeable battery
- 4 steel feet
- 4 teflon feet
- Wooden case
* with optical microscope 2008-25 code em25-OPT-025
* with optical microscope 2008-50 code em25-OPT-050
* with optical microscope 2008-75 code em25-OPT-075
* with optical microscope 2008-100 code em25-OPT-100
EM-25 USB VIDEO OPTIC includes:
- Optical microscope *
- 3.2 Megapixel USB microcamera
- 2m USB cable (A type/ Mini-B type)
- Measuring software Video View Basic
- Digital millesimal movement gauge
- Luminous source with led variable intensity
- Aluminium base adjustable in height
- Rechargeable battery
- Battery charger
- 4 steel feet
- 4 teflon feet
- Wooden case
* with optical microscope 2008-25 code em25-USB-025
* with optical microscope 2008-50 code em25-USB-050
* with optical microscope 2008-75 code em25-USB-075
* with optical microscope 2008-100 code em25-USB-100
APPLICATION EXAMPLES
(picture taken with EM-25 on Teflon feet)
Control and measurement of PCBs
(picture taken with EM-25 spacers 35 mm)
Control and measurement of precision mechanical parts
(picture taken with EM-25 on Teflon feet)
Control and measurement on flexographic printing
(picture taken with EM-25 on Teflon feet)
Control and measurement on offset printing
Control and measurement of flexographic plates
Control and measurement of flexographic plates
Control and measurement on chalcographic printing
(picture taken with EM-25 on additional antisliding rolls)
Control and measurement of printing cylinders
Control and measurement of small objects
Control and measurement of small tools
(picture taken with EM-25 on the supplied series
of spacers 15 mm and 35 mm
and an additional series of spacers 15 mm)
Control and measurement of section of objects
Control and measurement on samples of materials
(picture taken with EM-25 on a supplied series and
an additional series of spacers 15 mm)
Control and measurement of small sharp tools
TECHNICAL FEATURES
USB Microcamera
- Image sensor: 1/4" color CMOS
- 3.2 Mega pixels
- Output color format: YUV / MJPEG
- Available resolutions:
YUV: 1600x1200@5fps, 640x480@30fps
MJPEG: 2048x1536@15fps, 640x480@30fps
- Automatic white balance
- USB2.0 interface
- Operation temperature: 0°C - 50°C
Digital micrometric movement gauge
- Measurement range: 0 - 25 mm
- Resolution: 0.001 mm / 0.00005"
- Instrument error: ±2 µm (a 20°C)
- LCD Display
- Operation temperature: 5°C - 40°C
- Power supply: 1 silver oxide battery (SR44) - duration of about 1.2 years
Battery pack
- 32 hours of continous work (a month of work in normal conditions)
- Complete recharge in 4 hours with the battery charger in equipment
Using the magnetic spacers
- without spacers: inspection of objects with maximum height of 15 mm;
- with spacers 15 mm: inspection of objects with maximum height of 30 mm;
- with spacers 35 mm: inspection of objects with maximum height of 50 mm;
- opportunity to inspect objects with a height exceeding 50 mm with additional spacers
ACCESSORIES
Anti sliding rolls set (n°3)
for checks and measurements on cylinders of different types with diameter from 110mm
code Rul OVT 000653
Rear roll - single piece (L=177mm)
code Rul OVT 000659
Front roll - single piece (L=20mm)
code Rul OVT 000660
Additional set of 4 spacers 15 mm
code SPT OVT 000651
Spacer 15 mm
single piece
code SPT OVT 000661
Additional set of 4 spacers 35 mm
code SPT OVT 000652
Spacer 35 mm
single piece
code SPT OVT 000662
Spare Battery pack
code SPT OVT 000642
- Models: OPT-LEM25OPT025, OPT-LEM25OPT050, OPT-LEM25OPT075, OPT-LEM25OPT100, OPT-LEM25USB025, OPT-LEM25USB050, OPT-LEM25USB075, OPT-LEM25USB100, OPT-LEM25ASRS, OPT-LEM25SS15 & OPT-LEM25SS35
