Affordable, pocket sized, and easy to use. The BETA BREYE is a high quality non-contact Braille Dot Checker.
High accuracy due to non-contact measurements before and after gluing.
All package measurements collected in one A4 (8.5" x 11") PDF report.
Visual control of the dots optimizes height versus BURST THROUGH. The simple and quick quality tool for the press, gluing station and QA control.
Non-Contact Braille, Measurement and quality, Documentation According to DIN EN 15823
Visually check if any of the dots have "Burst". Check if the dots have a uniform shape. Setup your embosser to achieve the very best result.
CURRENT MECHANICAL BRAILLE DEVICES CAN ONLY SHOW YOU THE HEIGHT OF THE "HIGHEST" DOT. YOU NEED TO KNOW IF ANY DOTS ARE LOWER THAN THE REQUIRED HEIGHT
Check and control any Braille embosser before or after gluing. Measurement data is automatically collected and a report is created in PDF format.
Setup your embosser by checking across individual braille dots using the software to calculate statistics.
- Measure ALL braille heights from the highest to lowest points
- Non-Contact measurement and documentation according to DIN EN 15823
- Visually check if any dots have "burst" and for dot uniformity to adjust your embosser for your best finished product