GWJ Company

contactshipcallwe ship worldwide

Shopping Cart  [more]

Your cart is empty.

Shop by Manufacturer

Waterless Process Series Inks

Waterless Process Series Inks

ZIPSET Waterless Process Series is a high quality sheetfed waterless ink. The waterless is specially formulated to provide stability and to resist toning. This is accomplished through the use of special vehicles which provide a higher CTI (Critical Toning Index) to give printers a wider operating window. The use of high end pigments produces sharp clean images. Its ability to set and dry quickly reduces turn around time and allows for faster finishing. Once dry, it is laser safe, UV coatable, imprintable, embossable and scores, folds and cuts without cracking or bleeding. A full line of Pantone® Bases and PMS® blends are available in waterless formulation. AT-50 Stop Toning Agent is available for customers who want to mix their own colors or who need to adjust inks due to pressroom conditions.

Special Features

  • HIGH CTI (CRITICAL TONING INDEX)
  • VEGETABLE OIL BASED
  • SUPERIOR WORK-AND-TURN INK
  • QUICK SETTING
  • FAST DRYING
  • HIGH GLOSS
  • PRODUCES HIGH QUALITY RESULTS
  • STABLE ON PRESS
  • EXCELLENT MILEAGE
  • UV & AQUEOUS COATABLE*
  • FOIL STAMPABLE**
  • LASER SAFE***
WATERLESS
Process Yellow

Tack @ 1200rpm – 16.0
Tack @ 800rpm – 13.0
Flow – 17.0

2.2lbs/can - #14901
WATERLESS
Process Magenta

Tack @ 1200rpm – 17.5
Tack @ 800rpm – 15.0
Flow – 17.0

2.2lbs/can - #14902
WATERLESS
Process Cyan

Tack @ 1200rpm – 18.5
Tack @ 800rpm – 16.0
Flow – 17.0

2.2lbs/can - #14903
WATERLESS
Process Black

Tack @ 1200rpm – 19.5
Tack @ 800rpm – 16.0
Flow – 17.0

2.2lbs/can - #14904

Tack: Ink-o-meter 800rpm @90° F, Flow: Spread-O-Meter Radius (mm) @ 77° F

Recommended Temperature: 27°C <<< >>>35°C ( 80°F <<< >>> 95° F )

Actual tack and flow on press may vary due to roller temperature, ink film thickness, coverage, press speed, and also pressroom condition.
To achieve optimum results please follow running recommendations.

Limited Warranty -- Due to the many variables inherent in the printing process, which are beyond the control of the ink maker, the different types of laser equipment employed, and the various coatings available, we cannot assume responsibility for the final outcome of the printed job. Please contact Tokyo Printing Ink Corporation for a technical evaluation prior to printing.
* UV & Aqueous Coating recommended inline or off line after 48-72 hours.
** Foil stamping recommended after 48-72 hours.
*** Imprinting on laser imaged reprographic equipment recommended after 72 hours.

  • Models: 14901S, 14902S, 14903S & 14904S
  • Manufactured by: Zipset

Please Choose:
Check the box for the product, then add to the cart.

Zipset Waterless Process Series








Add to Cart:
Copyright © 2018 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices subject to change without notice.**

PIA Member

For your convenience, we accept these credit cards:
Credit Card Logos