Controls |
 |
Die cut label sensor |
Registration mark sensor |
The Heavy-Duty Strobe Light provides a stop motion image that is brighter, clearer and more accurate than a conventional strobe light. Since it provides up to 3 times more light, it can be used in areas with high ambient levels. This eliminates the need to reduce ambient lighting.
The Heavy-Duty Strobe Light can be used in all types of stop motion rotary or linear applications. Typical bulb life (50,000,000 flashes) approximately 2 years in normal applications.
Standard Features:
- Up to 2000 flashes per minute
- Internal Trigger - Continuously adjustable by operator
- 1/4" - 20 Mounting Plate
- Rugged extruded aluminum housing
- Plug-In strobe lamp is easily replaced
Optional Features:
- Up to 6000 flashes per minute
- Selectable External trigger
- Various Trigger sensors
- Universal mounting base and Heavy Duty strobe arm
- Timing Device with Magnetic Gear Sensor
Specifications
- Light Output:Approximately 0.4 joules per flash
- Power Required 115/230 volts ac, 50/60hz, 75 watts
- Dimensions:Approximately 4.25" H x 5.75" W x 9.25" D
- Trigger DelayContinuously adjustable from 0 to 360 electrical degrees
- External Trigger:Operates on 4 to 24 volts dc at 10mA.
- Minimum pulse width of 1 millisecond
- Warranty = 1 year
Heavy Duty Strobe Descriptions:
2000 Flashes/Minute
This strobe light will operate at a flash frequency between 120 to 2000 flashes per minute. The speed adjustment is made manually with the knob located on the back of the unit.
Selectable 2000 /4000/6000 Flashes/Minute
This strobe light will operate at a flash frequency between 120 to 6000 flashes per minute. A switch is provided which allows for the selection of maximum frequency. The speed adjustment is made manually with the knob located on the back of the unit.
2000 Flashes/Minute Externally Triggered
This strobe light will operate at a flash frequency between 120 to 2000 flashes per minute. The speed adjustment can be made manually with the knob located on the back of the unit or automatically via the trigger input connector.
Selectable 2000/4000/6000 Flashes/Minute Externally Triggered
This strobe light will operate at a flash frequency between 120 to 6000 flashes per minute user selectable. The speed adjustment can be made manually with the knob located on the back of the unit or automatically via the trigger input connector.
Strobe Accessories Descriptions:
Registration Mark Sensor:
Senses the mark of the web (mark scanner).
Die Cut Label Sensor:
Senses the absent of the matrix. (Yoke type scanner).
