GWJ Company

contactshipcall

Shopping Cart  [more]

Your cart is empty.

Shop by Manufacturer

Index of Products

Lithco Plate Punches

Lithco Plate Punches

Accuracy in an affordable plate punch
Lithco Plate Punches are available for all pinbar duplicator presses (25-pin or 38-pin) and most small, medium and large format sheet-fed presses.
Bench top models have optional floor stands available.
Some combination punch/plate bender available.

All Punches Feature:

  • Durable powder coated finish
  • Heavy metal base
  • Spring-return punch handle
  • Adjustable guides
  • Maximum plate thickness is 0.3 mm (0.012")
  • Plate alignment notches in industry standards of 220 mm, 425 mm, 550 mm, 780 and 830 mm (see schematics below)
  • Optical sensors to ensure correct punching (except Duplicator Plate Punches)

Please Note: James Burn Plate Punches are no longer available. They have been discontinued by the manufacturer.

Part # Description For Presses*
EQP-PP25 Duplicator Plate Punch All standard pinbar duplicators – 25 pin/12 1/2" wide
EQP-PP38 Duplicator Plate Punch All standard pinbar duplicators – 38 pin/18" wide
EQP-PP220BT 220 mm Bench top Plate Punch Heidelberg QM-46, GTO-46, GTO-52; Adast Ramayor, Dominant 506, 705, 706, 806; Ryobi 3000, 3200, 3302, 3304; Hamada 52, SA-651, SA-666
EQP-PP425BT 425 mm Bench top Plate Punch Heidelberg QM-46, GTO-46, GTO-52, K-Offset, M-Offset, SM-52, SM-72, SM-74; KBA-Planeta Rapida 72, 72K, 74; Sakurai 52, 58, 66, 72, 74; Shinohara 52, 56, 66, 74; Akiyama Bestech 28, 32
EQP-PP425FS 425 mm Floor Stand Plate Punch Same as EQP-PP425BT
EQP-PP425PB 425 mm Combo Floor Stand, Plate Punch and Plate Bender Same as EQP-PP425BT
EQP-PP425/780F 425/780 mm Combo Floor Stand Plate Punch Heidelberg SM52, SM74, SM102
EQP-PP425/780R600 425/780 mm Combo Floor Stand Plate Punch Roland 600, 700, 800
EQP-PP425/780R300 425/780 mm Combo Floor Stand Plate Punch Roland 300
EQP-PP425/780S102 425/780 mm Combo Floor Stand Plate Punch Sakurai 102
EQP-PP425/780B 425/780 mm Combo Floor Stand Plate Punch Heidelberg SM52, SM74, SM102
EQP-PP425/780PB 425/780 mm Combo Floor Stand, Plate Punch and Plate Bender Heidelberg SM52, SM74, SM102
EQP-PP550BT 550 mm Bench Top Plate Punch Komori L26, L28
EQP-PP550FS 550 mm Floor Stand Plate Punch Same as above
EQP-PP550/830PB 830 mm Combo Floor Stand, Plate Punch and Plate Bender Komori L26, L28 L40
EQP-PP830 830 mm Floor Stand Plate Punch Komori L40

Patterns below are not to scale.

MasterPunch™ Duplicator Plate Punch

Punches paper, polyester or metal plates

  • Adjustable for any width plate (12" wide, open ended with adjustable plate guide)
  • Punches 25 round holes at one time (hole diameter of 11/64"/pins spaced 1/2" center to center/top of hole 3/16" from the edge of the plate)
  • Pins are made of E-52100 high-carbon, chromium steel, heat treated to tool steal hardness for exceptional resistance to wear and abrasion
  • Works great with AB Dick, Multi, Chief, Itek, Ryobi, Hamada, etc.
Part # Description Width
EQP-MPP MasterPunch Duplicator Plate Punch 12"

Standard Pinbar Punch

Typical Punch Pattern for Large Presses
(Each press has its own specifications)
  • Models: EQP-MPP, EQP-PP220B, EQP-PP425B, EQP-PP425F, EQP-PP550F EQP-PP425/780F & EQP-PP425R300
  • Manufactured by: Lithco

Please Choose:
Check the box for the product, then add to the cart.

Lithco Plate Punch













Add to Cart:
Copyright © 2017 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices subject to change without notice.**

PIA Member

For your convenience, we accept these credit cards:
Credit Card Logos