Extech is a manufacturer if high quality electronic testing and monitoring instruments.
ExStik II waterproof combination pH, Conductivity, Total Dissolved Solids (TDS), Temperature (°C or °F) and Salinity meter. It is the Swiss Army Knife of water property meters.
Key Benefits
A reliable combination pH/Conductivity meter that is pocket-sized. In addition to monitoring the pH and Conductivity, the TDS function can be used to check incoming water supplies for degree of hardness and the Thermometer can be used for checking the temperature on fountain solution, developer, fixer or any other critical liquid in the print shop. The auto ranging capability in the Conductivity mode eliminates the need to predetermine the correct range for the sample being tested – the meter does it for you!
Features:
- Nine units of measure – pH, µS, mS, ppm, ppt, mg/L, °C and °F
- Analog bar graph indicates trends
- Internal memory stores up to 25 labeled readings for easy recall
- Adjustable Conductivity to TDS ratio from 0.4 to 1.0
- 0.5 fixed Salinity ratio
- CAL feature warns to check calibration, but allows continued use
- RENEW feature alerts user when electrode needs replacement
- Data Hold, Auto Power Off and Low Battery indicators
- Waterproof to IP67 Standard
- Complete with flat surface electrode (minimizes fouling for increased accuracy), sample cup with cap, polishing paper, four 1.5V SR44W batteries and 48” neck strap
| Features |
Specifiations |
| Conductivity |
0 to 199.9 µS, 200 to 1999 µS, 2.00 to 19.99 mS |
| TDS |
0 to 99.9 ppm (mg/L), 100 to 999 ppm (mg/L), 1.00 to 9.99 ppt (g/L) |
| pH |
0.00 to 14.00 pH |
| Temperature |
32° to 149°F (0° to 65°C) |
| Auto Temp Compensation |
Yes |
| Maximum Resolution |
0.1 µS, 0.1 ppm (mg/L), 0.01 pH, 0.1°F |
| Basic Accuracy |
±2% FS, ±0.01 pH, ±1.8°F/1°C |
| Dimensions |
1.4" x 7.3" x 1.6" (36 x 186 x 41 mm) |
| Weight |
3.8 oz. (110 g) |
The ExStik II is the heart of the pH/Conductivity Meter Kit. The kit provides all of the calibrating solutions that will be needed to keep the meter accurate over its lifespan. The kit is highly recommended to provide proper calibration and protection for your ExStik II meter.
Kit includes:
- EC500 ExStik II Meter
- 84µS, 1413µS, 12,880 µS Conductivity calibration standards
- pH buffer pouches (1 each of 4, 7, 10pH plus rinse solution)
- Weighted base
- 3 sample cups with caps
- Carry/storage case
