GWJ Company

contactshipcallwe ship worldwide

Shopping Cart  [more]

Your cart is empty.

Shop by Manufacturer

Core Cutter - CT14 Auto and Servo

Core Cutter - CT14 Auto and Servo

The most accurate large ID core cutting machine worldwide.

The CT14 has been the leading large ID core cutter in the market due to its' value, speed, versatility, longevity and high throughput. This heavy duty core cutter is built with durable components for use around the clock. The CT14 will continue to produce perfectly cut cores with very little maintenance. This heavy-duty line of core cutters come in two options: the automatic or the servo-driven.

CT14 Automatic Core Cutter

To load a parent core, the operator switches the load/run selector switch to "Load" and slides the core onto the mandrel. He or she then sets the end stop to the proper designated length and sets the target in position of the core. The operator then presses the motor start push button and switches the load/run selector switch to "Run". The machine will advance the core until it makes contact with the end stop which will start the cutting cycle on the machine. Once the core is cut, the machine will advance for the next cut.

CT14 Automatic Features:

  • Standard 60", 90" or 120" parent core length capability (Custom sizes are available)
  • Accepts 3" – 24" internal diameter cores (Larger ID machines are available for special applications)
  • Accurate +/-0.020" cut core width tolerance
  • Simple tooling change for core ID size conversion process
  • One minute core width change
  • Clean, square burr-free cuts
  • Built-in reference scale
  • Micrometer end stop adjustment

CT14 Servo Core Cutter

The operator can pre-program the cut widths on the touch screen, allowing an easy change to the cut width length on a single parent core. Once the parameters are set, the operator is ready to load a parent core. The operator switches the load/run selector switch to "Load" and slides the core onto the mandrel. He or she then presses the motor start push button and switches the load/run selector switch to "Run". The machine will begin to advance and cut cores of the length that is selected in the run screen. The cores will continue to be cut until the entered count value is exceeded or the tube is used up. The operator will then load the next core and the machine will again take over the cutting process.

CT14 Servo Features:

  • Standard 60", 90" or 120" parent core length capability (Custom sizes are available)
  • Accepts 3" – 24" internal diameter cores (Larger ID machines are available for special applications)
  • Accurate +/-0.015" cut core width tolerance
  • Simple tooling change for core ID size conversion process
  • Clean, square burr-free cuts
  • Automatic core advance-servo motion control
  • Automatic core loading & core eject
  • 10" Allen Bradley operator interface display for entering all production requirements
  • Job storage for up to 40 frequently run jobs

Crating charges are additional

Be sure to add a Core Chuck & Anvil with your machine order

  • Manufactured by: CoreTech


E-mail for Price

Copyright © 2018 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices subject to change without notice.**

PIA Member

For your convenience, we accept these credit cards:
Credit Card Logos