GWJ Company

contactshipcallwe ship worldwide

Shopping Cart  [more]

Your cart is empty.

Shop by Manufacturer

Core Cutter - CT8 and CT8+ Manual

Core Cutter - CT8 and CT8+ Manual

Durable and practical, the CT8 manual core cutter can accept core ID sizes from 1"-6".
The easy to handle CT8+ is an enhanced version with a pneumatic knife.

CT8: The World Leading Manual Core Cutter

The CT8 gives you the same cut quality and tight tolerances of our larger machines in an ergonomic package. It uses the same tooling, drive system and knives as our other line of Core Cutters while offering the same cut quality. The CT8 has been accurate, every time, only now it performs even better with a heavier structure, from the support legs to the motor mounts. The CT8 is a versatile surface-driven core cutter. It is built on a 1.75" rock maple work surface which is durable and practical. It accepts core ID sizes from 1-6".

The CT8 is quite easy to operate, after sliding the parent core onto the mandrel, the operator sets the end-stop, which determines the cut width. The operator lowers the knife using the handle, then presses the start button. Once start butting is activated, the core starts spinning. When the core is cut, the operator manually advances the core to the end-stop. The process is then repeated as necessary.

Features:

  • 3/4 horsepower
  • Heavy Duty 120 volt motor
  • Standard 60" or 90" parent core length capability
  • Accepts 1" – 6" internal diameter cores
  • Accepts 1/2" maximum wall thickness
  • 1/4" minimum cut core width
  • Accurate +/-0.010" cut core width tolerance
  • Less than a 5 minute core ID size conversion process
  • Clean, square, burr-free cuts

CT8+: Manual Core Cutter

The CT8+ has all of the features of the CT8, with an upgraded pneumatic cutting system to do the work for you. After sliding the parent core onto the mandrel, the operator sets the end-stop, which determines the cut width. The operator then holds down two push buttons which start the motor and the pneumatically lowers the knife to cut the core. After the core is cut, the operator manually advances the core to the end stop. This process is then repeated as necessary.

Features:

  • 3/4 horsepower
  • Heavy Duty 120 volt motor
  • Standard 60" or 90" parent core length capability
  • Accepts 1" – 6" internal diameter cores*
  • Accepts 1/2" maximum wall thickness*
  • 1/4" minimum cut core width
  • Accurate +/-0.010" cut core width tolerance
  • Less than a 5 minute core ID size conversion process
  • Clean, square, burr-free cuts
  • Pneumatically advanced knife arm

*Please Note: The CT8 manual core cutter is recommended for 6" ID cores with a 1/2" or thicker wall.

Crating charges are additional

Be sure to add a Core Chuck & Anvil with your machine order

  • Manufactured by: CoreTech

Please Choose:
Check the box for the product, then add to the cart.

CoreTech CT8 (Add Core Chuck and Anvil)






CoreTech CT8+ (Add Core Chuck and Anvil)






CoreTech CT8 Matched Core Chuck and Anvil











Add to Cart:
Copyright © 2018 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices subject to change without notice.**

PIA Member

For your convenience, we accept these credit cards:
Credit Card Logos