|
|
|
 |
This stainless steel straight edge is 2" wide and .090" thick, with one beveled edge and one unbeveled edge. The 6" length and the 12" length edges... |
|
 |
These straight edges are made of hardened aluminum and have inch (32nds for 1"/ 16ths the rest) and metric (half-millimeters for 1 cm/ millimeters... |
|
|
These straight edges are made of hardened aluminum and have inch (32nds for 1"/ 16ths the rest) and metric (half-millimeters for 1 cm/ millimeters... |
|
 |
The 100 Series corkback ruler is 11/4" wide and .020" thick without corking and approximately .072" with cork backing. It has inches in 32nds for the... |
|
 |
General Ultra Rules are precision stainless steel marking rulers that look like an ordinary ruler. Look closer and you will see microfine marking... |
|
 |
This is a two-sided aluminum meter stick with engraved numbers manufactured by L.S.Starrett Company. The front contains inches in 16ths on the top... |
|
 |
The 200 Series corkback ruler is 11/4" wide and .020" thick without corking and approximately .072" with cork backing. It has inches in 16ths on the... |
|
 |
This left-handed corkback ruler in available in 12" only. It is the same as the 200 Series but reads from right to left. |
|
 |
This two-sided engraved stainless steel meter stick has inches in 16ths on the top and millimeters on the bottom. The reverse side contains... |
|
 |
This zero-centered corkback ruler is in inches in 32nds on the top and the bottom is in millimeters. This ruler has a flush start and finish. It can... |
|
 |
This one-sided ruler is available in 12', 18", and 24" lengths. It is manufactured with .032" thick stainless steel and is 1 1/4" wide. The... |
|
 |
This 12" long two-sided ruler is 1 1/4" wide and .032" thick. Both edges on the front have inches in 16ths. The back has pica/half-pica increments on... |
|
 |
This 15" long two-sided ruler is 1 1/4" wide and .032" thick. Both edges on the front have inches in 16ths. The back has pica/half-pica increments on... |
|
|
This 18" long two-sided ruler is 1 1/4" wide and .032" thick. Both edges on the front have inches in 16ths. The back has pica/half-pica increments on... |
|
 |
This two-sided ruler is 1 1/2" wide, .032" thick, and is available in 24" and 36" lengths. The front has inches in 16ths on the top and bottom and a... |
|
 |
The 604A printers comparative ruler is a two-sided ruler available in a 24" length only. The front has inches (16ths) on both edges and a line scale... |
|
 |
This two-sided ruler in available in a 24" length only. It is 1 1/2" wide and .032" thick. The front has inches in 16ths on the top and in 32nds on... |
|
 |
The 604C printers comparative ruler is a two-sided ruler available in a 24" length only. The front has inches (16ths) on the top and millimeters on... |
|
 |
This one-sided ruler is available in 12", 18", 24", and 36" lengths. The top is inches (16ths) and the bottom is picas/half-picas. The 12", 18",and... |
|
|
This one-sided ruler is available in 12", 18", 24", and 36" lengths. The top is inches (16ths) and the bottom is picas/half-picas. The 12", 18",and... |
|
 |
This two-sided ruler is available in 12", 18", and 24" lengths. It is 1 1/4" wide and .020" thick. The front has inches in 16ths and... |
|
 |
This one-sided ruler is available in 24" only. It has a width of 7/8" and the thickness is .020" for increased flexibility. The top has sub-zero inch... |
|
 |
This two-sided ruler is available in 6", 12", and 24" lengths. It is 1" wide and .020" thick. The front has two sub-zero scales (one in 32nds and the... |
|
 |
This two-sided ruler is available in a 24" length only. It is 1" wide and .032" thick. The front has inches in 16ths on the top and in 100ths on the... |
|
 |
This two-sided ruler is 1" wide and .032" thick. It comes in 12", 24", and 36" lengths. Measurement starts flush on each end. The front has inches in... |
|
 |
This two-sided 6" ruler is 1/2" wide and .020" thick. It has pica/half-pica increments on front top and inches (16ths) on the bottom. ON the back... |
|
 |
This two-sided line gauge is available in 6", 12", 18", and 24" lengths. The front has 6 & 12 point and agate lines and the back has 6 & 12 point and... |
|
 |
This two-sided line gauge is available in a 12" length only. The front has 6 & 12 point and 8 point increments and the back has inches in 16ths and... |
|
 |
This two-sided line gauge is available in a 12" length only. The front has inches in 16ths and the back has 6 & 12 point increments. |
|
 |
This two-sided line gauge is available in a 12" length only. The front has picas and inches in 16ths and the back has Cicero and metric scales. |
|
 |
This two-sided line gauge is available in a 12" length only. The front has picas and inches in 16ths and the back has metric and agate line scales. |
|
 |
This most popular, two-sided line gauge is available in 12", 18", and 24" lengths. The front has inches in 16ths and agate lines. The back has 6 & 12... |
|
 |
This two-sided line gauge is available in 12", 18", and 24" lengths. The front has millimeters and inches in 16ths. The back has 6 & 12 point and... |
|
 |
This very popular, two-sided line gauge is available in 12", 18", and 24" lengths. The front has 6 & 12 point and inches in 16ths and the back has... |
|
 |
This two-sided line gauge is available in a 12" length only. The front has 6 & 12 point and inches in 16ths and the back has 8 and 10 point... |
|
 |
This two-sided line gauge is available in a 12" length only. It consists of all point markings. The front has 5 point and 7 point and the back has 9... |
|
 |
This popular two-sided ruler is available in 18" and 24" lengths. It is 1 1/2" wide and .032" thick. The front has inches in 16ths on the top and... |
|
 |
The 616A two-sided versatile ruler is 1 5/8" wide, .032" thick and is available in an 18" length only. The front has inches in 16ths along the top... |
|
 |
The 622 is a two-sided scaling ruler with a width of 1 1/4" and thickness of .032". It is available in a 24" length only. The front side has 1/3 off;... |
|
 |
This very popular two-sided ruler in available in 18" and 24" lengths. It is 1 1/4" wide and .032" thick. The front has inches in 32nds for the first... |
|
 |
The 624M Series is a two-sided metric ruler. It is 1 1/4" wide, .032" thick, and is available in 12", 18", and 24" lengths. The front has inches in... |
|
 |
It measures 1 1/2" in width, is .032" thick and is available in 24" and 36" lengths. The front has zero-centered inches in 16ths on the top and 12ths... |
|
 |
It measures 1 1/4" wide, is .032" thick and is available in a 24" length only. The top is zero-centered in millimeters and the bottom is... |
|
|
It measures 1 1/4" wide, is .032" thick and is available in a 24" length only. The top is zero-centered in millimeters and the bottom is... |
|
 |
The 628 two-sided scaling ruler is a more extensive version of the 622. It is 1 1/2" wide, .032" thick and is also only available in a 24" length.... |
|
 |
This two-sided ruler is 1 1/4" wide, .032" thick, and is available in a 18" length only. The front has inches in 16ths on the top and... |
|
 |
This is a 6" ruler with clip. It is 1/2" wide with inches in 32nds and 64ths on the front and a decimal equivalent chart on the back. This flexible,... |
|
 |
General Ultra Rules are precision stainless steel marking rulers that look like an ordinary ruler. Look closer and you will see microfine marking... |
|
 |
The 650DTP Series desk top publishers ruler is 1 1/4" wide, .032" thick, and is available in 6" and 18" lengths. It was developed for use with most... |
|
 |
This 6" ruler is 3/4" wide with inches in 32nds and 64ths on the front and decimal equivalents on the back. |
|
 |
This one-sided line gauge is 18" It has 6 and 12 point on the left edge, inches in 16ths in the middle, and agate lines on the right edge. |
|
 |
This very popular, two-sided line gauge is available in 12" and 18" lengths. It has three different scales on the front - 6 point & 12 point on the... |
|
 |
This two-sided line gauge is available in a 12" length only. The front has metric and inches in 16ths and the back has 10ths and 100ths increments. |
|
 |
This two-sided ruler is 1/2" wide and is available in 6", 12", 18", and 24" lengths. It is photo-etched/chrome finished for clear, fine precision... |
|
 |
This one-sided 6" ruler with clip is 1/4" wide and has millimeters and inches in 16ths. This Item Has Been Discontinued. Please Click For Replacement. |
Call for price
|
 |
General Ultra Rules are precision stainless steel marking rulers that look like an ordinary ruler. Look closer and you will see microfine marking... |
|
 |
This transparent, acrylic ruler is of exceptionally fine quality. It is 1 1/2" wide heavy gauge .150" thick acrylic construction with beveled top... |
|
|
This transparent, acrylic ruler is of exceptionally fine quality. It is 1 1/2" wide heavy gauge .150" thick acrylic construction with beveled top... |
|
 |
This pica beveled ruler is 18" long, 2" wide, and .037" thick. This transparent pica ruler is marked with agate lines and inches in 1/8ths. This... |
|
 |
This English/metric beveled ruler is 18" long, 2" wide, and .037" thick. This is a transparent laboratory ruler with one edge divided in inches in... |
|
 |
This transparent ruler is 24" long, 2" wide, and .037" thick. It is calibrated in 16ths to the inch on one edge and millimeters on the other. Each... |
|
 |
This vinyl ruler is 18" long, 2" wide, and .037" thick. It has inches in 16ths, picas, agate calibrations, proofreader's symbols, printer's rules... |
|
 |
Outstanding two piece set - both surface printed and matte finished to give accurate fine calibrations without glare. They are both transparent for... |
|
 |
This transparent, plastic ruler is 18" long, 2" wide, and .050" thick. It is constructed of durable, transparent plastic; increments and calibrations... |
|
 |
This graphic arts leading gauge ruler is 13 3/4" long, 3" wide, and .037" thick. This ruler is printed on transparent plastic and laminated for... |
|
 |
This one-sided plastic ruler is designed for the newspaper trade. It is transparent and available in a 13" length only. It features 6 and 9 column... |
|
 |
This one-sided plastic ruler is designed for the newspaper trade. It is opaque and available in a 13" length only. It features 6 and 9 column widths... |
|
 |
The P-51 is 14 1/4" long x 2 3/4" wide x .037" thick. Measures picas (12 pt.); 4, 5, 5 1/2, 6, 7, 8, 9, 10, 11, 13, 14, and 15 point; agate lines;... |
|
 |
This handy, two-sided, pocket version of the P-51, the P-52 is 7" long x 2 3/4" wide x .037" thick. It has gauges for millimeters; Inches in 16ths;... |
|
 |
This transparent, plastic ruler has picas and agate lines on the edges with a center scale in points at the top and an "e" sale with type sizes... |
|
