GWJ Company

contactshipcallwe ship worldwide

Shopping Cart  [more]

Your cart is empty.

Shop by Manufacturer

ICP Anti-Marking Jackets for Heidelberg Press Models

ICP Anti-Marking Jackets for Heidelberg Press Models

The Green Frog™ ICP Anti-Marking Jackets utilizes the Triple Silicon Coated High Performance ICP-S material and are specially designed to adapt to most all Heidelberg and other press models. They adapt to specific cylinder positions without the need for additional packing or expensive press alterations. The jackets are designed to install quickly and easily onto the transfer and delivery cylinder positions utilizing the OEM clamping systems. The jackets are pre-packed using a soft, heat and solvent resistant packing material that insures proper support of the printed substrate during the transfer process. We also use precision fabricated metal parts, using tempered and stainless steel to insure there are no fitting issues.


Bar to Rod Design

Heidelberg GTO 46/52 MO 65

Bar to Bar Design

Heidelberg SM / SX 52

Bar to Slot Design

Heidelberg SM / SX 74

Rod to Rod Design

Heidelberg SM 72

Rod to Pin Design

Heidelberg SM 102

Rod to Rod Design

Heidelberg SM 102

The illustration below shows a typical Heidelberg press configuration.

The cylinders shown in Green are typically where the Green Frog ICP Anti-Marking Transfer Jackets are installed.

Hamada, Heidelberg, Mitsubishi and Ryobi are Trademarks of their respective companies

Green Frog Jackets are available for the following Press Models

Press Model Part Number
Position
Notations Standard Thickness Standard Surface Type
Heidelberg QM46 JQ46D-VGSSNF
Delivery
Velcro Attachment .043"/1.1mm Small Bead Smooth Surface
Heidelberg GTO 46 JG46T-SGSSNF
Transfer
.043"/1.1mm Small Bead Smooth Surface
Heidelberg GTO 46 JG46D-SGSSNF
Delivery
Measurement Required .043"/1.1mm Small Bead Smooth Surface
Heidelberg GTO 52 JG52T-SGSSNF
Transfer
.043"/1.1mm Small Bead Smooth Surface
Heidelberg GTO 52 JG52D-SGSSNF
Delivery
Measurement Required .043"/1.1mm Small Bead Smooth Surface
Heidelberg SM/PM 52 JS52T-SGSSAC
Transfer
.022"/0.55mm Small Bead Smooth Surface
Heidelberg SM/PM 52 JS52D-SGSSNF
Delivery
.043"/1.1mm Small Bead Smooth Surface
Heidelberg MO 65 JM65T-SGSSNF
Transfer
Measurement Required .043"/1.1mm Small Bead Smooth Surface
Heidelberg MO 65 JM65D-SGSSNF
Delivery
Measurement Required .043"/1.1mm Small Bead Smooth Surface
Heidelberg SM 72 JS72T-SGSSNF-XXX
Transfer
Measurement Required .043"/1.1mm Small Bead Smooth Surface
Heidelberg SM 72 JS72D-SGSSNF-XXX
Delivery
Measurement Required .043"/1.1mm Small Bead Smooth Surface
Heidelberg SM/PM 74 JS74T-SGSSNF
Transfer
.043"/1.1mm Small Bead Smooth Surface
Heidelberg SM/PM 74 JS74D-SGSSNF
Delivery
.043"/1.1mm Small Bead Smooth Surface
Heidelberg SM 102 JS102T-SGSSNF
Transfer
Rod to Rod (765mm) .043"/1.1mm Small Bead Smooth Surface
Heidelberg SM 102 JS102D-SGSSNF-705
Delivery
Rod to Rod (705mm) .043"/1.1mm Small Bead Smooth Surface
Heidelberg SM 102 JS102D-SGSSNF-762
Delivery
Rod to Rod (762mm) .043"/1.1mm Small Bead Smooth Surface
Heidelberg SM 102 JS102T-PGSSNF
Transfer
Rod to Pin SN: Above 533-500 .043"/1.1mm Small Bead Smooth Surface

The Shinoda ICP Anti-Marking jackets can be customized concerning surface type and thickness

Surface Type Bead Size No Packing Felt Back Packing
Small Bead / Smooth Surface 50 Microns .007" / 0.17mm .043" / 1.1mm
Medium Bead / Semi-Coarse Surface 100 Microns .009" / 0.22mm .048" / 1.2mm
Large Bead / Coarse Surface 200 Microns .012" / 0.30mm .051" / 1.3mm
  • Manufactured by: Shinoda

Please Choose:
Check the box for the product, then add to the cart.

ICP Anti-Marking Jackets





















Add to Cart:
Copyright © 2024 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices, images and specifications subject to change without notice.**

PIA Member    D & B Verified

For your convenience, we accept these credit cards:
Credit Card Logos